FALL PROTECTION SYSTEM
So many hazards occur in working height condition…….so we must use fall protection system……like ABC and other
1. Personal fall arrest system....... Control a fall.
2. Personal fall restraint system... Prevent a fall.
3. Positioning device system........ positions a worker and limits a fall to two feet.
4. Guardrail system....................... prevents a fall.
5. Safety belt system.................... controls a fall.
6. Warning line............................... Warn a worker about work area limit
7. Slide-guard system..................... prevents a worker from sliding down a sloped roof.
“We are using safety net system protect worker more than safety belt”
SAFETY NETS ARE TWO TYPES: -
1. Personal net
2. Material net
PERSONAL NET INFORMATION…( it is protected worker )
1) Mess Size 101.6*101.6 mm…..4 inch’s
2) Breaking strength 544.31 Kg.
3) Net below working at height 6.096M
MATERIAL NET INFORMATION: -( it protects worker)
1. Mess size 19.6*19.6mm…..0.75 inches
2. Breaking Strength 22.68kg
3. Distance fall should not exceed
WORKING AT HEIGHT PRECAUTIONS: -
1. Use guard Rail system
2. Select the Proper PPE
3. Inspect Your PPE
4. Ensure you understand Fall Distance.
5. Select Acceptable anchor point.
6. Don’t work near live electrical wires
7. Ensure skilled workers
8. Supervisor monitoring
9. Ensure Scaffold, lift and Ladder.
10. Use Ladders properly (4:1) Rule.
0 comments: